Thanks Gerry,
i will make the changes tonight after work.
Thanks Gerry,
i will make the changes tonight after work.
Bob,
Did you get the 2010 probing working with the XHC Mach3 USB motion card?
They released a v2.39.9 on 2017.9.19. The release notes state: "Set the probe user dro 2000,2001,2002 to replace the variable 2000,2001,2002.
so user could getuserdro(2000) to replace the GetVar(2000) when probing."
I'm trying to get this working now on 3.043.062..
[QUOTE=slodat;2171688]Bob,
Did you get the 2010 probing working with the XHC Mach3 USB motion card?
I have given up on the XHC card and switched to a C62 card behind a smooth stepper. The XHC crashed too many times.
Currently the problem I am having is that the fonts on the Screenset are too big for the windows. I tried everything I know to do with screensize and resolution but still get oversized font. What am I missing?
Bob
In the 2010 Screenset? Can you show me what you are talking about? The fonts in the screen are a fixed size, and can't be changed.Currently the problem I am having is that the fonts on the Screenset are too big for the windows.
I'm guessing the issue you are talking about is due to a Windows Font Size Issue, and it's not the actual screen that has the issue?
Or do you mean the fonts in the DRO's?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Problem Solved. Had large fonts chosen in Control Panel/All Control Panel Items/Display. Changed to 100% font and the problem resolved itself. New problem has to do with my need to see my Optometrist........or get a 72 inch screen