Running a 5 phase stepper is difficult and there is very little information available on it. I would strongly recommend dumping that motor and going for something more standard.
Results 1 to 20 of 20
Threaded View
-
04-21-2015, 06:21 PM #13
Registered
- Join Date
- May 2005
- Posts
- 1397
Re: Driving 5 phase pentagon stepper motor with L298 and ATMEGA16
James hosts the single best wiki page about steppers for CNC hobbyists on the net:
http://www.piclist.com/techref/io/steppers.htm Disagree? Tell him what's missing! ,o)
Reply With QuoteSimilar Threads
-
Driving 5 phase pentagon stepper motor with L298 and ATMEGA16
By mkeyno in forum CNC Machine Related ElectronicsReplies: 0Last Post: 04-15-2015, 06:19 PM -
Stepper Motor Driving Torque
By EmaBlunt in forum Stepper Motors / DrivesReplies: 22Last Post: 11-21-2012, 08:28 PM -
driving 8wire stepper motor
By ktr in forum Stepper Motors / DrivesReplies: 1Last Post: 08-03-2009, 06:16 PM -
L298/L297 strange stepper motor noises
By cnc kiwi in forum Stepper Motors / DrivesReplies: 7Last Post: 12-26-2007, 05:18 PM -
Query: Current amplification for driving stepper motor...
By junior85 in forum CNC Machine Related ElectronicsReplies: 10Last Post: 02-24-2007, 05:09 PM
Tags for this Thread
Posting Permissions
