Does anyone know of a post for a practical cnc plasma/router table
thanks
teacher
Does anyone know of a post for a practical cnc plasma/router table
thanks
teacher
Have you checked with your Mastercam Reseller yet? They most likely will have something for you.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
I called Mastercam and they are working on one for me its a farley simple code.
I used a generic HAAS post suplied in MCX
F100
G0 x--y--
G1 X--Y--
G2 X--Y--I--J--
G3 X--Y--I--J--
Each line of code needs a G comand, G0 is interpited as torch off, G1,G2,G3, torch on. It's easy to edit the code on a small prg. but on a large file it sucks.
Tnaks for the reply.
Teacher
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Teacher,
Do you have a post but it is not putting in The G0, G1 G2 etc.... on each line.
if this is the case send the post I will look at it for you.
www.cad2cam.net
Programmer/ Certified Cam Instructor
could you help a man with a post processor for a routermast 52 by camtech it is running now but sometimes i cant make it cut a simple arc im using mastercam 8.11 with a post processor mpfan or mpfadal2