Re: Arcing connection on Laser CO2 tube connection
Where is it arcing to? If it is the frame - then its likely a connection issue at the HV side and the liquid tape or some HV splicing tape should work. Per a suggestion from Dave at sawmill creek, I also sheathed the wire in silicone tubing at the splice.
If it is arcing in the tube - then the tube is broken and needs replacement though you need to do that sort of warranty claim pretty fast after arrival. Its a common issue though, I actually think over 50% of the tube cost is warranty costs.
In case anyone is wondering, I'm the twin of the other gfacer on cnczone...