Could someone point me the direction for schematics or technical info on this board. Specifically would like to know if there is a signal that could be used to turn laser unit off and on.
Results 1 to 2 of 2
-
04-25-2015, 09:47 PM #1
Registered
- Join Date
- Dec 2010
- Posts
- 1
Xylotex board used in old CNC Shark controller.
-
04-26-2015, 02:52 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Xylotex board used in old CNC Shark controller.
Got a picture of the board?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
CNC Shark Controller
By burke in forum Want To Buy...Need help!Replies: 1Last Post: 03-21-2013, 02:44 PM -
Xylotex board help
By CROSSHATCH in forum Benchtop MachinesReplies: 106Last Post: 07-09-2008, 04:49 PM -
xylotex board on its way
By gun_mike in forum XylotexReplies: 7Last Post: 07-18-2007, 11:47 AM -
Is this same board as xylotex for less $$$?
By saris in forum XylotexReplies: 14Last Post: 03-07-2007, 12:39 PM -
Will a Xylotex board be any different?
By phantomcow2 in forum XylotexReplies: 5Last Post: 10-23-2005, 02:50 PM
Tags for this Thread
Posting Permissions
