584,826 active members*
5,213 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Uncategorised WoodWorking Machines > new labtop will not run mach3 on my diy router
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2012
    Posts
    22

    new labtop will not run mach3 on my diy router

    I purchased a dell 15 inspiron windows 8 64 bit and uc100 motion controller for my cnc router and am not getting any jog from the motors. I have been through three weeks of banging my head against this thing and still have no movement. mach 3 and the controller shows me that everything is working but again no movement??? what am I missing?

  2. #2
    Join Date
    Jul 2005
    Posts
    2415

    Re: new labtop will not run mach3 on my diy router

    SInce the UC100 is using a plugin running in MACH that would be the place to start. Try it on another PC with WIN7 64 bit and see if you get motion. Unfortunately all MACH knows is that it is sending trajectory information through the plugin to the device.

Similar Threads

  1. Converting Syntec Router Controller EZ3 To A Mach3 Router Controller
    By Victorian Signs in forum Controller & Computer Solutions
    Replies: 2
    Last Post: 05-25-2014, 10:54 AM
  2. Router PWM control through Mach3
    By base1992 in forum Mach Software (ArtSoft software)
    Replies: 7
    Last Post: 10-22-2013, 03:59 AM
  3. Mach3 Router Control
    By cbreitzman in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 10-22-2010, 02:57 PM
  4. NEW CNC router With Mach3
    By automationtechinc in forum News Announcements
    Replies: 2
    Last Post: 08-02-2008, 12:19 AM
  5. Mach3 Router Screen.
    By ger21 in forum Screen Layouts, Post Processors & Misc
    Replies: 4
    Last Post: 07-24-2008, 08:47 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •