[Beardy]

Hi,
I was woundering weather someone could help.
I seam to have a missing file from my Mastercam X5.
I am wanting to using the GENERIC FANUC 3X MILL which comes with the program.
From what i read it uses 3 files.
GENERIC FANUC 3X MILL.control File
GENERIC FANUC 3X MILL.PST File
GENERIC FANUC 3X MILL.MMD File

I am missing the GENERIC FANUC 3X MILL.MMD File? could someone send me the file please.
OR
point me in the right direction

Thanks

[Superman]

The MMD and Control files both reside in the same directory..... \\CNC Machines\
the .PST file is in the....... \\MILL\Posts\ directory

Both of these should be in the McamX5 root directory on C: drive

They normally are included with the standard install

[Beardy]

The MMD and Control files both reside in the same directory..... \\CNC Machines\
the .PST file is in the....... \\MILL\Posts\ directory

Both of these should be in the McamX5 root directory on C: drive

They normally are included with the standard install

Hi,
I have searched there all folders in mcam even shared folders and the MMD file is not there. I have the control and pst file.
I have tried reinstalling but still not there