584,842 active members*
4,614 visitors online*
Register for free
Login
Results 1 to 7 of 7
  1. #1
    Join Date
    May 2015
    Posts
    4

    Diffrent cuts depth

    Hi everyone. I try to cut clock shape on mdf. Clock has inside and outiside cut. I use same tool for both full depth cuts, but tool didnit cut all the way through material in the inside toolpath, but cuts throught all tha way outside toolpath, same cut depth is on both tool paths. please help and sorry for my bad english

  2. #2
    Join Date
    May 2009
    Posts
    37

    Re: Diffrent cuts depth

    Material not flat?


    Sent from my iPad using Tapatalk

  3. #3
    Join Date
    May 2015
    Posts
    4

    Re: Diffrent cuts depth

    material is flat

  4. #4
    Join Date
    May 2009
    Posts
    37

    Re: Diffrent cuts depth

    How thick was the mdf? It may have buckled slightly, I have found this when cutting through thin material.


    Sent from my iPad using Tapatalk

  5. #5
    Join Date
    May 2015
    Posts
    4

    Re: Diffrent cuts depth

    6mm thick

  6. #6
    Join Date
    Mar 2003
    Posts
    35538

    Re: Diffrent cuts depth

    Post your V Carve Pro file and the g-code.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  7. #7
    Join Date
    May 2015
    Posts
    4

    Re: Diffrent cuts depth

    here is gcode and picture

Similar Threads

  1. Depth of Cuts
    By Mattyvdv in forum MetalWork Discussion
    Replies: 1
    Last Post: 08-01-2014, 03:00 PM
  2. Feeds and depth of roughing cuts:
    By ruawake in forum Tormach Personal CNC Mill
    Replies: 7
    Last Post: 04-08-2013, 08:16 PM
  3. Typical Depth of Cuts for steel
    By Palinvan in forum Taig Mills / Lathes
    Replies: 5
    Last Post: 08-04-2012, 01:11 AM
  4. 4th axis tool path depth cuts?
    By clivefx in forum Mastercam
    Replies: 3
    Last Post: 07-20-2011, 09:36 PM
  5. MCX depth cuts question
    By charper in forum Mastercam
    Replies: 7
    Last Post: 02-07-2007, 05:46 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •