584,866 active members*
5,200 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > fanuc om parameters lost now spindle doesn't work
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2015
    Posts
    2

    fanuc om parameters lost now spindle doesn't work

    Femco kfv 40 1995. Fanuc om control. Lost parameters dead battery. Got all parameters back but now spindle just spins and doesn't stop when reset is pushed. Have to power down to stop. No rpm displayed on screen. have fanuc om manual but doesn't have 6000 series parameters. Can anyone help

  2. #2
    Join Date
    May 2015
    Posts
    2

    Re: fanuc om parameters lost now spindle doesn't work

    Ok so I got almost everything working. The only issue I have is when orienting the spindle it rotates normally for 1 rotation then slows down drastically for 1/2 rotation then stops at orient position. Any ideas. I have tried changing the orient spindle speeds with no luck. It changes the initial rotation speed but always slows down for the last 1/2 rotation. Please help.

  3. #3
    Join Date
    Dec 2015
    Posts
    170

    Re: fanuc om parameters lost now spindle doesn't work

    i have same problem with my johnford cnc40 with om control how you will sorted out your problem RESET not working AND NO rpm????

Similar Threads

  1. Fanuc OMC - Lost parameters
    By Snowfly in forum Fanuc
    Replies: 3
    Last Post: 02-04-2014, 06:08 AM
  2. fanuc 3m lost parameters
    By zosos in forum Fanuc
    Replies: 4
    Last Post: 10-28-2011, 09:16 PM
  3. Replies: 9
    Last Post: 06-15-2010, 12:52 PM
  4. Fanuc O-M lost parameters
    By macperfo in forum Fanuc
    Replies: 17
    Last Post: 03-27-2009, 12:47 AM
  5. Parameters lost in Fanuc OM
    By wicked_won in forum CNC Machining Centers
    Replies: 0
    Last Post: 03-27-2008, 10:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •