584,862 active members*
5,354 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 0iMC -9031 Motor lock or V Sig Loss
Results 1 to 6 of 6
  1. #1
    Join Date
    Dec 2006
    Posts
    310

    Fanuc 0iMC -9031 Motor lock or V Sig Loss

    Dear Sirs

    In MDI/Auto mode, only in case of one particular tool, when spindle speed is more than 1500 rpm, we find Load on spindle (L) as seen at the bottom of position screen to be shooting upto 164%(although tool is running on load ie not in touch with job) and hence trips with alarm 9031, we dont have this problem in case of any other tools even at 2000 rpm

    We replaced tool with new one

    Spindle Motor has timing belt and there is no gear box.

    We can not doubt feedback, as no problem in case of any other tools even bigger than this one

    With same set of toolings and same job being made since last 5 years

    Kindly revert

  2. #2
    Join Date
    Feb 2012
    Posts
    1

    Re: Fanuc 0iMC -9031 Motor lock or V Sig Loss

    9031 spn 1 motor lock alarm on fanuc control cnc mill

  3. #3
    Join Date
    Apr 2012
    Posts
    85

    Re: Fanuc 0iMC -9031 Motor lock or V Sig Loss

    Does the motor have dual winding contactor? It may be one 'range' contacts are bad.

  4. #4
    Join Date
    Nov 2006
    Posts
    175

    Re: Fanuc 0iMC -9031 Motor lock or V Sig Loss

    I would check the pullstud first, if it is different, it may lead to different travel of the collet mechanism

  5. #5
    Join Date
    Dec 2013
    Posts
    39

    Re: Fanuc 0iMC -9031 Motor lock or V Sig Loss

    Quote Originally Posted by M.RISHIKESH View Post
    Dear Sirs

    In MDI/Auto mode, only in case of one particular tool, when spindle speed is more than 1500 rpm, we find Load on spindle (L) as seen at the bottom of position screen to be shooting upto 164%(although tool is running on load ie not in touch with job) and hence trips with alarm 9031, we dont have this problem in case of any other tools even at 2000 rpm

    We replaced tool with new one

    Spindle Motor has timing belt and there is no gear box.

    We can not doubt feedback, as no problem in case of any other tools even bigger than this one

    With same set of toolings and same job being made since last 5 years

    Kindly revert
    TRY M 40
    M 41
    or check the motor

  6. #6
    Join Date
    Feb 2019
    Posts
    7
    IS the tool too heavy? Try to lower the speed.

Similar Threads

  1. Fanuc 0iMC PCMCIA CF Memorycard
    By anderin in forum Fanuc
    Replies: 57
    Last Post: 05-23-2022, 03:56 PM
  2. Serious problem in new Fanuc 0iMC.
    By motordude in forum Fanuc
    Replies: 16
    Last Post: 08-09-2021, 01:35 PM
  3. simulation in Fanuc 0imc
    By ahmed4040 in forum Fanuc
    Replies: 6
    Last Post: 05-30-2010, 09:37 AM
  4. Fanuc 0iMC param. problem.
    By GPena in forum Fanuc
    Replies: 2
    Last Post: 08-12-2009, 04:05 PM
  5. tool change prblem with fanuc 0imc
    By ahmed4040 in forum Fanuc
    Replies: 7
    Last Post: 01-06-2008, 10:17 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •