584,814 active members*
5,169 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2013
    Posts
    3

    Gildemeister CTX400 Eltro Pilot Keypad

    Hello all,

    I recently installed an EPL 2.2 control unit repaired and refurbished by DMG Mori into a CTX 400 lathe. I have a good boot up with all parameters initialised.
    When prompted to press operating mode key I have no response from the keypad. I believe i have a good connection back to the control and thought maybe the board behind the keypad may be faulty. There is signal between the control and keypad as when i start without connection i get "system error". with connection everything boots fine but i have no response from keys.
    Id appreciate any help with this.

    Thank you.
    Paul

  2. #2
    Join Date
    May 2013
    Posts
    3

    Re: Gildemeister CTX400 Eltro Pilot Keypad

    Problem solved. Sent Keypad FTE board to an automation company for test/repair.
    Control now working however some parameters still incorrect for the machine.

  3. #3
    Join Date
    Apr 2009
    Posts
    18
    Quote Originally Posted by flynno83 View Post
    Hello all,

    I recently installed an EPL 2.2 control unit repaired and refurbished by DMG Mori into a CTX 400 lathe. I have a good boot up with all parameters initialised.
    When prompted to press operating mode key I have no response from the keypad. I believe i have a good connection back to the control and thought maybe the board behind the keypad may be faulty. There is signal between the control and keypad as when i start without connection i get "system error". with connection everything boots fine but i have no response from keys.
    Id appreciate any help with this.

    Thank you.

    Paul

    Hi Paul

    Are you have ctx400 with ELP2 gieldmaiester parameter
    My email [email protected] if possible you please send me.
    Best regards
    Fatehi

Similar Threads

  1. Gildemeister CTX400 with heidenhain pilot
    By robkavitch in forum Post Processors for MC
    Replies: 0
    Last Post: 10-26-2013, 03:04 PM
  2. Any Gildemeister lathe operators out there? I'm looking for opinions on 5 axis CTX400
    By MadMax in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 03-08-2013, 07:36 PM
  3. mitsubishi keypad
    By ikennedy in forum Want To Buy...Need help!
    Replies: 2
    Last Post: 08-01-2012, 06:09 AM
  4. Keypad/Touchscreen
    By mmckell in forum Cincinnati CNC
    Replies: 2
    Last Post: 02-07-2012, 07:05 PM
  5. Inverter Keypad Help
    By JacquesLeDick in forum Excitech routers
    Replies: 1
    Last Post: 12-05-2011, 02:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •