584,862 active members*
5,353 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > Fadal service and or machine rebuilding?
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2012
    Posts
    125

    Fadal service and or machine rebuilding?

    We have 2 late 90's Fadals 4020 and 5020. We are located in Wichita, KS. Do any of you know who in this part of the country rebuilds or services these machines? I said rebuild because I bleive the turkite is worn down on the coloum for Z axis on both machines.

  2. #2
    Join Date
    Apr 2005
    Posts
    1194

    Re: Fadal service and or machine rebuilding?

    Yes check with these guys... They fly out, spray weld, scrape and replace turcite but you will need a machine to cut the turcite and put in some oiling grooves (And a few $$$)

    Advance Scraping Company | Complete Machine Rebuilding, Way and Box Way Grinding, Re-scraping of machine Ways
    We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts If you have a broken down Fadal give a shout.

Similar Threads

  1. Need FADAL Service Person
    By SeanW in forum Fadal
    Replies: 1
    Last Post: 02-14-2013, 07:16 PM
  2. rebuilding an older machine..Advice please...
    By ironelephant in forum Commercial CNC Wood Routers
    Replies: 7
    Last Post: 12-04-2012, 01:36 AM
  3. Bridgeport Machine Rebuilding in Chicago
    By star1280 in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 06-03-2011, 05:37 AM
  4. Fadal Parts and Service
    By iess525 in forum Fadal
    Replies: 4
    Last Post: 10-28-2009, 03:04 AM
  5. Fadal Service- Not
    By Crash in forum Fadal
    Replies: 66
    Last Post: 06-12-2007, 05:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •