Hi there,
Received my K40-III last week and after the needed adjustment steps like squaring the base etc... I got it working.
First step was to 3d print an air assist nozzle, now I'm building a manual adjustable table. I decided to share the design with the rest of you guys because there might be someone interested in something similar.
This table was designed with my needs in mind, I only cut thin materials and usually don't engrave so I only needed 2 inches (5 cm) of adjustment so this might not be perfect for everyone. Keeping the materials on focus is very important when we need to do precise cutting that's why building the table was very important to my needs.
Here are some pictures of the project. I'm already building it so if there's interest I can share pictures of the build itself.