[dany_riv]

Hello all.
We have a M20 Citizen CNC machine, with this alarm,
Z70 Abs Data Error, 0001 Z1
Z70 Abs. Data Error, 0001 Z2T1
Z70 Abs Data Error 0001 Z3.

This Machine was down for a power supply 220 vac to 24 vdc. we replaced the power supply but this alarm is showing.
Can you help us?.

[slidingheadman]

Z70 is a zero return alarm
Zero return all axis the only one that could be a problem is T1 there is a procedure for this if you need it

[Drisscn]

You have to make the origin of the machine but first you have to do it before t1 turret If you want to get the procedure [email protected]

[Milad127]

Hi . good day . I have a Cincom M20 lathe that has Z70 data error alarm 0004 A, thank you if anyone can help

[slidingheadman]

Z1 axis needs a zero return

[Drisscn]

Hi . good day . I have a Cincom M20 lathe that has Z70 data error alarm 0004 A, thank you if anyone can help

.

Hi Brother I hope all is well yes it is necessary to make the origin of the Z axis there is a procedure to do that if you can not send me on my e-mail