Help!!! I am at a customers shop and forgot my RS232 cable. I have 10 machines to write new programs for, but 3 of them were not built by my company and the copy program option is not turned on. All of our machines had the option turned on and I am finished with them. I know the parameter for the 16, but the options are not the same on the 15M. Does anyone know which bit will turn this option on? Will I have to go into IPL mode to do it? Any help would be greatly appreciated.
A friend of mine said it might be 9111 Bit 3, but wasn't sure. He also vaguely went thru IPL mode but I didn't like the sound of that. (holding buttons down while powering up) Sounds like a bad neighborhood to me. This is what happens when they send a mechanic out to do an engineers job.
Thanks!!
Results 1 to 3 of 3
-
11-09-2006, 04:04 AM #1
Registered
- Join Date
- Feb 2005
- Posts
- 69
Need option bit for Fanuc 15M to to copy programs
-
11-15-2006, 06:08 PM #2
Registered
- Join Date
- Nov 2006
- Posts
- 14
9111.3 for tape editing expansion
-
01-24-2007, 09:03 AM #3
Registered
- Join Date
- Sep 2006
- Posts
- 15
does this parameter causes program memory erase during enbling?
Reply With Quote
Posting Permissions
