[Scotech1au]

I have recently purchased a Mazak VQC 15 40 in need of some minor repair.

The spindle motor driver has to be replaced as it not working correctly. we have a good secondhand OEM replacement, but the problem is that the existing driver is not the original component and has some different wiring and connectors on it.

Is there anyone that can help out with a photo of the original driver and connectors and/or a wiring diagram.

Any help would be greatly appreciated.

Regards
Chris Scoble

[john robertson]

hello

our company has a Mazak VQC 15/40 , we have electrical manuals an a maintenance manual for a 30/50 which I am told is very similar
send me your email an I can send these to you

cheers John

[Scotech1au]

Thanks heaps John.

Email address sent to your PM box.

Regards Chris.

[Thomas Zamirski]

Here's the page that you'll probably be interested if you haven't found anything yet.

Hope this helps.

[Scotech1au]

Thanks a lot Tom appreciate it.

I will be keeping an eye on the updates on your 15 40 thread.

[sudsy]

What state are you in. I have VQC 20/50 manuals if they might help

[Scotech1au]

Thanks a lot for the offer Bob.

At this stage John from NZ has sent me an electronic copy of the 30 50 manuals and Tom from the USA has posted the image below.
Hopefully the electronics guy will be able to make use of it.

You have got to love the internet.

Regards
Chris

[Ishtiaq_Ahmad]

hello

our company has a Mazak VQC 15/40 , we have electrical manuals an a maintenance manual for a 30/50 which I am told is very similar
send me your email an I can send these to you

cheers John

Hello I also need VQC 15/40 Electric manual as well as schematics. Could you please help me.