Hi all, if you wanna help with post or something else please let me know. I have experience with pp many years.
Hi all, if you wanna help with post or something else please let me know. I have experience with pp many years.
Hello,
I seek a post processor " machine CMS brembana concept osai 10 " to alphacam,
thank you for your answers
helio
I wrote you PM.
Need a post for ONSRUD OSAI 5 Axis for alphacam !
I have it. Write me PM.
Do you know how to write post. I need for bridge saw 5 axis
Poslano z mojega GT-N7100 z uporabo Tapatalk
Yes i have some experience with this . It is not so simple. I would need know type of machine, name of drive control. If i have not this post i would need also some documentation about your machine.
Controlers are ESSA. Machine is Donatoni bridge saw for stone cutting. 5 axis + lathe..
Poslano z mojega GT-N7100 z uporabo Tapatalk
Hi, have you got Amada Laser post-processor with Fanuc 160iL ? Thanks in advance
Would you look if you have got one I need, please?
I wanna let you know that my post is not free. I have not problem give you some advice with something or make some small changes in the post. But if you want post direct for your machine i wanna pay for it. I think that my prices are very very very smalll. I give you also warranty for post which i provide. I made many post for diferrent machine. It is my hobby, but im not charity . You can always contact your local resseler for post,, if you do not pay for this me .
I will send you a sample of gcode today. Send me on PM for price..
Best regards...
Poslano z mojega GT-N7100 z uporabo Tapatalk
Hey I'm looking for PPs to run my Emmegi machines. Is that something that you can do?
Hi Guys
We are having a trouble about Alphacam post processor file. My employee had formatted the computer that he was using. After format, we are facing an error occured about post processor file; says "Compile error in hidden module : Events" when we run Alphacam . I think this error causes because of different versions of our pp file and my alphacam program. Post Processor file is V8 but my Alphacam shows that its version 11. Is it possible to find a post processor for HolzHer Hops V11? Our machine is HolzHer CNC 7123 Promaster.
Thanks in advance.
Hello,
I seek a post processor for CMS brembana Machine with C axis .
cnc is osai 10-510i
post for alphacam
thanks
helio
Hi I need a pp for a scm routomat 3 m/c as num 750 controller compatattable with win7 Alphacam 2016 r1 any help would be great.thanks
email me at
[email protected]