584,802 active members*
4,902 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Alphacam > Alphacam postprocesor
Page 2 of 3 123
Results 21 to 40 of 43
  1. #21
    Join Date
    Feb 2016
    Posts
    1

    Re: Alphacam postprocesor

    Hi all.
    I'm looking for post processor osai 3 axis for Alphacam. Somebody could help me?

  2. #22
    Join Date
    Dec 2015
    Posts
    7
    Quote Originally Posted by VITALILEV View Post
    Hi all.
    I'm looking for post processor osai 3 axis for Alphacam. Somebody could help me?
    Hi what controller are you using and also if you go to icons you can choose your post as there are already a few built-in to alphacam

  3. #23
    Join Date
    Mar 2016
    Posts
    1

    Re: Alphacam postprocesor

    Hi all !
    Alphacam would need postprocessor file
    Bacci Twin 780 CNC machines.
    If someone can please help.
    Thank you!

  4. #24
    Join Date
    Mar 2016
    Posts
    1

    Re: Alphacam postprocesor

    Hello, i would like to get your help around this matter...

    I'am looking for a post processor for the machine "Biesse Rover B 4.35"
    Actually using Alphacam 2016 R1

    Is there any chance?

    Best Regards

  5. #25
    Join Date
    Apr 2015
    Posts
    327

    Re: Alphacam postprocesor

    Hello,

    let me know on my email.

    [email protected]
    Alphacam post and VBA macros, Autodesk HSM post.
    www.cadcam-softcz.cz

  6. #26
    Join Date
    Nov 2015
    Posts
    4

    Re: Alphacam postprocesor

    Hello
    For Biesse Rover, I can sugest to use TopSolid, is free and simple to work, if you need help please do not hesitate to write me, I have 3 years expérience with the biesse machine, i worked with BiesseWorks and bsolid, optiplanning

  7. #27
    Join Date
    Apr 2015
    Posts
    327
    Quote Originally Posted by SOUFYANE View Post
    Hello
    For Biesse Rover, I can sugest to use TopSolid, is free and simple to work, if you need help please do not hesitate to write me, I have 3 years expérience with the biesse machine, i worked with BiesseWorks and bsolid, optiplanning
    TopSolid is free????? From which time? Maybe i have wrong information but price Top solid Cad+Cam is higher then Alphacam.
    This post i do not want say that Top solid is bad. I think that you are in a wrong section.
    Alphacam post and VBA macros, Autodesk HSM post.
    www.cadcam-softcz.cz

  8. #28
    Join Date
    Apr 2016
    Posts
    1

    Re: Alphacam postprocesor

    Hi, im looking for DMC 835v DECKEL MAHO post processor on alphacam.
    It will be great if someone can help me. thanks in advance.

  9. #29
    Join Date
    Jun 2015
    Posts
    1

    Re: Alphacam postprocesor

    Hello, I know this is a old thread, but i can't find nothing, I'm try find a working postprocessor for alphacam that work with head-head 5 axis, for a GMM stone CNC. If some body can provide a generic post processor head-head 5 axis for alphacam maybe I can modify it

  10. #30
    Join Date
    Apr 2015
    Posts
    327

    Re: Alphacam postprocesor

    If you are familiar with some basic programming and have knowledge about CNC logic you can use generic Alphacam post after instalation.
    Alphacam post and VBA macros, Autodesk HSM post.
    www.cadcam-softcz.cz

  11. #31
    Join Date
    Jan 2019
    Posts
    1
    Hi I am new to Alphacam and just got a new machine, can someone please point me in the right direction?
    So I have Alphacam and it won’t open ultimate router as it says no post processor found, what do I do? I have a Syntec 6mb and an omnitech 3 axis with atc 12 tool change carosel and a vertical drill bank, it also has auto load and unload, I can’t find out if I just need a post processor for the Syntec or the machine or both HELP!

  12. #32
    Join Date
    Aug 2019
    Posts
    5
    hello
    do u have a P P for a 5 axis helios cnc machine?

  13. #33
    Join Date
    Aug 2019
    Posts
    5
    hello
    i need a 5 axis post processor for helios machine

  14. #34
    Join Date
    Jul 2014
    Posts
    39
    Hi
    Did you find any post for OSAI 10Series in Alphacam?
    I have and OSAI 6Axis and looking for a post.
    Also if there is any software for building post processor in Alphacam, Thats Ok

  15. #35
    Join Date
    Aug 2019
    Posts
    5
    Quote Originally Posted by ngmajid View Post
    Hi
    Did you find any post for OSAI 10Series in Alphacam?
    I have and OSAI 6Axis and looking for a post.
    Also if there is any software for building post processor in Alphacam, Thats Ok
    No i only have 1 post for a 5 axis milling & i am working on editing this post

  16. #36
    Join Date
    Aug 2016
    Posts
    6

    Re: Alphacam postprocesor

    Quote Originally Posted by Maroslav4 View Post
    Hi all, if you wanna help with post or something else please let me know. I have experience with pp many years.
    i need help for a helios machine

  17. #37
    Join Date
    Mar 2011
    Posts
    2

    Re: Alphacam postprocesor

    Hi all
    Can anyone help with a Alphacam post for a Biesse Rover 23.

    Thanks in advance

  18. #38
    Join Date
    Mar 2019
    Posts
    27

    Re: Alphacam postprocesor

    Hi
    is there any post processor for 5 axis saw cutting stone for alphcam, it give me error when i use to open the program for 5 axis saw ( no OEM post found)

  19. #39
    Join Date
    Aug 2019
    Posts
    2

    Re: Alphacam postprocesor

    Im seaching heidenhain milling 3axis postprocessor

  20. #40

    Re: Alphacam postprocesor

    Hi to all!!
    Somebody could help me? I'm looking for post processor of Biesse Rover 35 for Alphacam.
    Thanks!!

Page 2 of 3 123

Similar Threads

  1. postprocesor for Heidenheim TNC 426
    By Mirko Tomić in forum Post Processors for MC
    Replies: 3
    Last Post: 12-04-2020, 11:23 AM
  2. Postprocesor vh65
    By mordock in forum Fadal
    Replies: 0
    Last Post: 05-04-2010, 02:28 AM
  3. Postprocesor Expert
    By electra5 in forum Fanuc
    Replies: 0
    Last Post: 11-26-2009, 01:05 AM
  4. Postprocesor
    By milwin in forum Surfcam
    Replies: 3
    Last Post: 09-16-2008, 10:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •