So am I.
Thread: fanuc 6m locked parameters
Results 41 to 45 of 45
-
08-12-2020, 01:45 PM #41
Registered
- Join Date
- Apr 2009
- Posts
- 1379
Re: fanuc 6m locked parameters
-
08-12-2020, 10:12 PM #42
Junior Member
- Join Date
- Sep 2012
- Posts
- 216
Re: fanuc 6m locked parameters
I will try with E stop as well as MDI. Definately can't change them in MDI alone. All the others no problem
Regards Bob
-
08-13-2020, 06:46 AM #43
Registered
- Join Date
- Oct 2014
- Posts
- 137
Re: fanuc 6m locked parameters
You can not change any bit of parameters 000~005 or what their separate bits? Please tell me series/version of your base software.
-
08-13-2020, 09:21 AM #44
Junior Member
- Join Date
- Sep 2012
- Posts
- 216
Re: fanuc 6m locked parameters
Same with the 300-305 i think. Can't change them either. Not sure of the software version but the machine was built in sept 1981 if that's any help
Originally Posted by agering
Regards Bob
-
08-13-2020, 10:54 AM #45
Registered
- Join Date
- Oct 2014
- Posts
- 137
Re: fanuc 6m locked parameters
Possible see the series/version of software on CRT if the system power on under pressed Emergency button.
Reply With QuoteSimilar Threads
-
Fanuc OT Wear Offset page locked???
By grumpy74 in forum FanucReplies: 5Last Post: 02-21-2015, 08:14 AM -
System/option parameters locked on ospU10L
By Zachmuscle in forum OkumaReplies: 4Last Post: 10-18-2014, 05:17 AM -
Fanuc i18 Locked Read and Ladder
By mirc899 in forum FanucReplies: 1Last Post: 09-23-2013, 09:29 PM -
0-MD 9xx parameters locked... auto corner override can't be re-enabled
By gwarble in forum FanucReplies: 2Last Post: 04-21-2010, 04:28 AM -
Fanuc 11M on Hitachi Seiki VA-45 Locked in tool change
By kf4zht in forum FanucReplies: 3Last Post: 04-01-2009, 11:06 PM
Tags for this Thread
Posting Permissions
