584,858 active members*
4,947 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > i can`t copy a program fom USB memory to CNC
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2005
    Posts
    74

    i can`t copy a program fom USB memory to CNC

    Hi guys, we have a new chinese cnc lathe with FANUC Oi mate TD with USB and PCM card terminals, so i try to copy a program from USB to CNC memory but no work. I set 17 in the parameter 20, but no work. i hope your advice, thanks for your time.
    Regards,
    Alain
    From Peru.

  2. #2
    Join Date
    Dec 2014
    Posts
    103

    Re: i can`t copy a program fom USB memory to CNC

    I know that on the big Onsrud routers I use at work to sel job from a usb card. you need to go to job manger then usb transfer to even see the jobs (NC Code) I don't know if it helped at all

  3. #3
    Join Date
    Mar 2003
    Posts
    2932

    Re: i can`t copy a program fom USB memory to CNC

    Here's a procedure to do this. You should limit your filenames on the USB stick to something simple, i.e. O1234.NC. Filenames that have illegal characters or are too long can cause alarms.
    Attached Thumbnails Attached Thumbnails How to transfer programs from USB MEM to 0i-D.pdf  

  4. #4
    Join Date
    Dec 2005
    Posts
    74
    Quote Originally Posted by dcoupar View Post
    Here's a procedure to do this. You should limit your filenames on the USB stick to something simple, i.e. O1234.NC. Filenames that have illegal characters or are too long can cause alarms.
    Thanks, i solved the problem.
    Regards,
    Alain

Similar Threads

  1. SV-503 Copy from Hard Drive(card) to Memory
    By smecher in forum Mori Seiki Mills
    Replies: 2
    Last Post: 05-22-2014, 09:32 PM
  2. Fanuc OT program copy
    By hmc710 in forum Fanuc
    Replies: 3
    Last Post: 07-22-2010, 10:25 PM
  3. Copy from Hard Drive to Memory
    By cpmfastools in forum Haas Mills
    Replies: 7
    Last Post: 03-26-2010, 08:28 PM
  4. Can't copy ALL programs from memory to USB...
    By Mike Braddock in forum Haas Lathes
    Replies: 9
    Last Post: 03-23-2009, 04:42 PM
  5. Copy Program Section?
    By donl517 in forum Milltronics
    Replies: 5
    Last Post: 10-31-2006, 12:47 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •