[NMartino]

Hi! Hope you can help me with this:
Today when I turned on the machine everything worked in the normal way, but when the axis are moved I see that the values doesn't update in the screen at the moment and they have five minutes delay. The same happening when I want to change the FEED to MDI.
Another delay is produced when I try to save a draw.
If someone has experimented this problem I'd thank the suggestions. Here in Argentina I don't have solution from the technician support.

Best regards!

[mr_sodick]

is the problem solved already ? sorry i was late to read it.

[outziouar]

please can you help me,
i have a problem on my sodick A320D ex21,
when it is loading it stops on (system loading 12/100) and show red message:
(SYS2 version up install
Insert the floppy disk in the USER side ,press the any kay.)
can you help me pls?
I Need Floppy disk System 1 and 2 and3

[NORMAR4]

Outziouar:
No hablo Ingles si es posible me podrias escribir en Español?
Saludos