So I run a toyoda vf 60, and am boring a part 180 degrees apart on the B axis. My bores are coming out .002" offset. so if I put a .001" in the common offset they come out perfect. I am wondering if there is a parameter I can change to offset where machine X zero is to solve the problem for future machining?
Results 1 to 3 of 3
-
09-20-2016, 09:40 PM #1
Registered
- Join Date
- Aug 2016
- Posts
- 3
X axis off from center of pallet rotation
-
09-20-2016, 09:47 PM #2
Registered
- Join Date
- Aug 2016
- Posts
- 3
Re: X axis off from center of pallet rotation
Oh and I am using the side of a tombstone and using Machine coordinates to machine my part. so one side would be X-15.2171 and the other X15.2171, thanks.
-
09-21-2016, 06:07 PM #3
Registered
- Join Date
- Aug 2016
- Posts
- 3
Re: X axis off from center of pallet rotation
If anyone has any answers as to how I can solve this problem I would be greatly appreciative!
Reply With QuoteSimilar Threads
-
Mori Seiki nh5000 stops after pallet B does a 180 degree rotation - without alarm
By woox123 in forum Mori Seiki MillsReplies: 5Last Post: 07-26-2019, 09:21 AM -
HS-1 RP pallet rotation
By GITRDUN in forum Haas MillsReplies: 3Last Post: 08-25-2014, 01:38 PM -
Pallet Rotation on a PFH-4800?
By Race 10 in forum Mazak, Mitsubishi, MazatrolReplies: 6Last Post: 07-19-2013, 06:13 PM -
KITAMURA 630i rotation of pallet
By CLEVELAND23 in forum KitamuraReplies: 2Last Post: 03-20-2013, 08:58 PM -
datum center of pallet?
By RCD ROG in forum FeatureCAM CAD/CAMReplies: 1Last Post: 12-17-2012, 05:58 PM
Tags for this Thread
Posting Permissions
