Hi,
We have 200 aluminum boxes that need to have two connector holes enlarged by a hair: this involves a single pass of a 1/4 cutter to shave off approximately .02 inches. We have a CNC machine here, but the parts are at our US office, and if possible I would like to find someone in Massachusetts to do this for us. We've tested this here, and it takes about 30 seconds per box, which includes loading and unloading them from a vice, so this is a couple hours of work.
If anyone is interested, and can jump on this, please send me a PM.
Best Regards,
Frank
Results 1 to 3 of 3
-
06-18-2015, 05:57 PM #1
Registered
- Join Date
- Mar 2008
- Posts
- 67
Looking for CNC machining in the Boston Massachusetts area
-
06-18-2015, 11:38 PM #2
Registered
- Join Date
- Sep 2008
- Posts
- 277
Re: Looking for CNC machining in the Boston Massachusetts area
your pm box is full...Can you send me a print of the part? I'm about an hr south of boston.
.Thanks
Mike
-
06-18-2015, 11:42 PM #3
Registered
- Join Date
- Mar 2008
- Posts
- 67
Re: Looking for CNC machining in the Boston Massachusetts area
Hi, I can send you a picture of the part in the morning. Frank
Sent from my XT1032 using Tapatalk
Reply With QuoteSimilar Threads
-
Looking for Mentor in Massachusetts Area
By gobstopper in forum Mentors & Apprentice LocatorReplies: 1Last Post: 02-10-2013, 05:07 PM -
Any Sharp VMC owners in S. NH or Boston area?
By spencer313 in forum Sharp CNCReplies: 5Last Post: 04-10-2008, 03:03 PM -
Seeking mentor in Boston Area
By alliek3 in forum Mentors & Apprentice LocatorReplies: 0Last Post: 06-17-2007, 10:33 PM -
Looking for Boston area X2 experience...
By ort5 in forum Mentors & Apprentice LocatorReplies: 0Last Post: 04-20-2007, 04:27 PM
Tags for this Thread
Posting Permissions
