584,874 active members*
5,222 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Cincinnati CNC > Cincinnati HAWK 250 New Turret help needed for installation
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2012
    Posts
    3

    Exclamation Cincinnati HAWK 250 New Turret help needed for installation

    I have a CNC Turning HAWK 250 from Cincinnati, the machine had its turret stripped off during transit.
    so it is lying just as a piece of scrap for me.
    Need help, planning to install a Electromechanical Bi Directional Turret, Can I change its PLC for the new turret?
    Controller is up and running good, with all the drives and Motors working perfectly
    The Controller is from Cincinnati Acramatic

  2. #2
    Join Date
    Dec 2006
    Posts
    584

    Re: Cincinnati HAWK 250 New Turret help needed for installation

    Is the turret repairable?? It should be a Duplomatic turret that you can send to them for repair. I would not think that you could change the PLC to accommodate a different turret that would be cost effective. Can you supply some pics of the machine and turret.

    Mike CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services

Similar Threads

  1. Cincinnati Hawk 150
    By madmike46 in forum Cincinnati CNC
    Replies: 6
    Last Post: 05-22-2018, 10:25 AM
  2. Hurco Hawk installation disks query
    By HurcoUser in forum HURCO
    Replies: 9
    Last Post: 03-09-2010, 11:32 AM
  3. Cincinnati Hawk 150
    By madmike46 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 07-10-2007, 04:32 AM
  4. cincinnati hawk 150
    By madmike46 in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 07-01-2007, 03:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •