Hi,
I have a Hurco 5 axis (VMX42SR) where B axis is the spindle head that rotates, and C axis is the table that rotates
I have a problem where the B axis gets 'knocked out' of position from machining, this problem gradually worse as time goes on. After calibrating the axis', the head will end up at B0.000, and by swinging an indicator in the spindle against the table, I can see how 'out of square' to the B axis is.

I'm getting frustrated by calling Hurco to come in and align this every time, it seems to be an endless issue and I'm looking how I can do this myself, is there a place in the controller I can adjust the home encoder position?

It seems it could easily be resolved with software.

Winmax Mill Version: V09.01.53
Motion System: UltiMotion (ZMP, MEI MPI VERSION: 03.04.16.B1.01)

Thanks