585,754 active members*
3,750 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Dynomotion/Kflop/Kanalog > Move command works until velocity command issued

Thread: Move command works until velocity command issued

Results 1 to 2 of 2
  1. 06-25-2015, 09:11 PM #1
    madprinter
    madprinter is offline Registered
    Join Date
    Jun 2015
    Posts
    10

    Move command works until velocity command issued

    Hi, got all set up with a kflop and h2n servo drives.

    got tuned with full movement.

    if I set params and use move0=1000 I get perfect movement. As soon as I issue a moveatvel command or a vel0=10 command all movement stops until reset.

    Help?

    Thanks,
    madprinter
    Reply With Quote Reply With Quote
  2. 06-30-2015, 01:06 AM #2
    TomKerekes
    TomKerekes is offline Junior Member
    Join Date
    May 2006
    Posts
    4045

    Re: Move command works until velocity command issued

    Hi madprinter,

    Are you running Version 4.33l ? If so this may be the issue:
    http://www.cnczone.com/forums/dynomo...ml#post1723336


    Otherwise could you include more details of exactly what you are doing?

    Regards
    TK
    http://dynomotion.com
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Air gun Off Command
    By nfrees114 in forum BobCad-Cam
    Replies: 2
    Last Post: 04-08-2014, 06:28 PM
  2. Fanuc OI does not move after M3 Command
    By kabdelwahid in forum Fanuc
    Replies: 5
    Last Post: 03-05-2014, 07:30 AM
  3. SV command
    By BFHammer in forum Fadal
    Replies: 6
    Last Post: 03-22-2013, 12:32 AM
  4. M6 Command only works one time now with new computer setup
    By jevs in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 02-14-2013, 06:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules