[Bill Gillen]

Hi,

I have a 10T keypad/circuit board giving me problems on my Wasino Turning Center. I have a good 10M keypad/circuit board.

My existing 10T keypad/circuit board has N860-3487-T010 on it. There is A86L-0001-0111 printed on the back of the PCB.

The 10M board has N860-3487-T020 on it. However, it also has A86L-0001-0111 printed on its PCB. The letters on the keypad fascia are all different. However, they are just on the fascia, which I would not use. I plan to keep the 10T fascia.

Can I use unscrew and use the 10M PCB board in place of my 10T PCB board?

Thank you,
Bill Gillen

[fordav11]

Fanuc keyboards are mostly standardized across Mill/Lathe. The difference is just the keypad overlay. since the PCBs are identical, yes you can swap it.