Dealing with a turret problem on a Doosan 2500sy, an alarm numbered 2047 appears at the end of the programming and on the change while reloading from position 1 to the next position (start of next cycle), a trembeling and noice that I cant determ if it occurs from the clamp or from a sudden and iregular rotation of the motor back and forth. Never the less, I adjusted and checked the proximity sencor of the turret but nothing changed.
Please take notice that this only happends at the beggining and the end of the cycle and mainly (but not only) when the ending tool is the number 1. We currently dont use the possition number 1, the problem has improved a lot but not fixed, as sometimes we have the same issue.
When we turn the turret manualy this never occurs, regardless of the number of times we turn it.
Any suggestions???