584,798 active members*
4,215 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2015
    Posts
    2

    C-tek km-150 232 connection

    Hi!

    I'm new to this forum

    I have 2 C-tek (taiwan) KM-150 with cnt380.8 software in the controller.

    I can't figure how to transfer nc prog. with the rs-232 port.

    Is there a c-Tek user here with a 232 setup who can share is setup?

    I have the same controller software on my desktop PC and I'm able to transfer prog. from another pc connected via serial port with a null modem cable but when I use the same setup on my cnc it don't work!

    All my config (baud rate ect) are ok!

    Thank you

  2. #2
    Join Date
    Jul 2015
    Posts
    2

    Re: C-tek km-150 232 connection

    Hi everyone!

    For other C-Tek users:

    I Found The problem! on my c-tek. the cable from the controller pc to the outside of the machine is already a null modem cable! (I think). To make it work I pluggued a nullmodem cable directly fro the controller pc to my laptop. Thatr why I assume the cable from the controller PC to the outside of the machine is a nullmodem! I don't have a "straight" cable to test it right now!

    Anyway have a nice day!

Similar Threads

  1. Arcing connection on Laser CO2 tube connection
    By pcaulfie in forum Laser CO2 Tubes, Diodes, RF and Power Supplies
    Replies: 3
    Last Post: 11-06-2015, 07:00 PM
  2. New to old connection
    By StillMakingCabinets in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 05-30-2011, 08:02 AM
  3. DB9 Connection
    By denz in forum Gecko Drives
    Replies: 2
    Last Post: 09-12-2009, 11:49 AM
  4. cnc connection
    By nona in forum Excitech routers
    Replies: 2
    Last Post: 08-28-2009, 06:54 PM
  5. What is NC NO connection?
    By mealman in forum CNC Machine Related Electronics
    Replies: 4
    Last Post: 10-15-2007, 11:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •