512,466 active members
6,052 visitors online
Register for free
Login
IndustryArena Forum > Metalworking Machines > CNC Swiss Screw Machines > Tsugami - main/back spindle rotation phase synchronisation control
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Sep 2007
    Posts
    12

    Tsugami - main/back spindle rotation phase synchronisation control

    Hi,
    Just got the new Tsugami HS265-5AX and I'm looking for some information or documentation for setting up the back spindle.
    I'm working with a special collet which has an inside form (it's not round). I would like to synchronise the main and back spindle rotation/phase. My problem is just how to handle the two parameters 4135 and 4034?

    I have to correct a mistake from my back spindle which is about 37 degrees off with the main spindle?

    After that how can I check if my correction is fine with the MDI mode?

    The explanation from the instruction is not so easy and I really would like to do it that way.

    Thanks for your help.

  2. #2
    Registered
    Join Date
    Jul 2015
    Posts
    1

    Re: Tsugami - main/back spindle rotation phase synchronisation control

    Email me your contact information, I'll send you the proceedure. The manual is correct, a bit difficult to understand the first time thru. Please note,there must have a keyway in the shaped sub collet, a 3mm pin needs to be inserted into the collet sleeve adapter to pin the collet prior to phase adjustment.

    Rob
    Tsugami/Rem Sales

  3. #3
    Registered
    Join Date
    Sep 2007
    Posts
    12

    Re: Tsugami - main/back spindle rotation phase synchronisation control

    Hi,
    Did you already send me the document?

Similar Threads

  1. Mach3 spindle control/VFD/back gear
    By Johns tool room in forum Mach Mill
    Replies: 4
    Last Post: 05-12-2014, 07:06 AM
  2. vfd 3 phase spindle on/off control via mach 3
    By Mick Gannon in forum Phase Converters
    Replies: 3
    Last Post: 07-18-2013, 02:32 PM
  3. Spindle pulse feed back out of control
    By woffler in forum Mach Mill
    Replies: 0
    Last Post: 08-18-2011, 01:43 AM
  4. How to control the speed of the main spindle?
    By george128306 in forum Hobbycnc (Products)
    Replies: 5
    Last Post: 04-15-2006, 10:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •