Hi, I made this piece machining, and how they see this faceted. The program is made with a CAM. I tried raising and lowering the tolerance, increase and reduce the amount of points. But keeps coming faceted.
I am with AICC 2 activated with G05.1 Q1 command (or P1, I can not remember at the moment) and working with a velicidad 1200mm / min.
The truth will never use this control and not to configurations should be modified, but in other controls have not had this problem.
I know I can solve programming with G02 and G03 ... but I need to solve a point to point program. When you generate a complex surface in 3D it is going to have to be if or point to point.
thank you very much