I need to get a quote to have these made I am looking for prices for 50, 100, 500, and 1000 qtys
the part needs to be turned from 303 SS
please pm me quotes
http://www.maddmanproducts.com/Home_Page/svalve.pdf
I need to get a quote to have these made I am looking for prices for 50, 100, 500, and 1000 qtys
the part needs to be turned from 303 SS
please pm me quotes
http://www.maddmanproducts.com/Home_Page/svalve.pdf
cdarnell, you have a PM
Thanks
Working Up A Quote... First, Where Are You Located? And I Noticed All Dims. Are .#### ... Tolerances +/- .001?
Thanks
We are in Kansas City, MO
tolerance +/- .005 is fine thanks
If so, you should be aware that o-rings usually need some space for squeeze. For a .070 o-ring, I believe the groove should be around .095 wide (that's from memory).
Parker has a very nice o-ring handbook that has lots of good info. I found it very handy in doing my first designs using o-rings.
(Sorry if I'm wrong or out of line.)
Ken
Kenneth Lerman
55 Main Street
Newtown, CT 06470
you have a pm
thanks,
jason
I pm'ed a quote.
Thanks
Dave
Dave Schell, SeaSchell Tackle Machining/Mfg./Design [email protected] 619 562-1835
Hey,guys,this is Jackson, mechanical manufacturing engineer with extensive field knowledge and work experience, my factory located in the world manufacture base center Dongguan/Shenzhen,China,your consultance of fabrication field of here always welcome,by the way,we offer Lathe and Milling/sheet metal fab/parts stamping service, any in need,
Just contact me,[email protected],thanks