I bought a 6040 cnc mechanical kit only I'm new to CNC and don't have much experience with the appropriate setup for the machine . If anybody could give me some info and recommendations it would be very appreciated .
Results 1 to 2 of 2
-
07-21-2015, 02:51 PM #1
Registered
- Join Date
- Apr 2015
- Posts
- 4
CNC router electronics recommendation.
-
07-24-2015, 01:10 AM #2
Registered
- Join Date
- May 2005
- Posts
- 1397
Re: CNC router electronics recommendation.
So you don't have motors yet?
Use this page to calculate the wattage you need to move
techref.massmind.org/techref/io/stepper/estimate.htm
then decide on the motors and drivers based on that.
Whatever you do, do NOT purchase a TB6065 based driver from eBay.James hosts the single best wiki page about steppers for CNC hobbyists on the net:
http://www.piclist.com/techref/io/steppers.htm Disagree? Tell him what's missing! ,o)
Reply With QuoteSimilar Threads
-
CNC ROUTER, Looking used, need recommendation.
By timex in forum Want To Buy...Need help!Replies: 0Last Post: 04-21-2014, 03:54 PM -
Need a recommendation of CNC router
By iwantonetoo in forum Commercial CNC Wood RoutersReplies: 4Last Post: 02-18-2013, 12:23 PM -
Recommendation for Cheap CNC-router solution
By asli_khan in forum Want To Buy...Need help!Replies: 3Last Post: 12-25-2010, 06:43 PM -
cnc router recommendation
By restos in forum Musical Instrument Design and ConstructionReplies: 0Last Post: 05-07-2010, 11:29 PM -
CNC Router Recommendation
By Semillon in forum Commercial CNC Wood RoutersReplies: 1Last Post: 05-08-2006, 05:11 AM
Tags for this Thread
Posting Permissions
