LF1325/1530
Whole specification
size（mxm） about6.5*3.2
Working area 1300*2500mm/1500*3000mm
Table height 950mm noise <65Db(not include exhaust fan noise)
Power demand AC380V±5% 50HZ（single phase） Whole power 7KW ball screw/9KW Gear
Tempreture Tempreture:10—35℃ Humidity： 40—85%

Fiber specification
Type Fiber
Working mode continious/ power 500 W /1000w
Spot mode Multimode Wave length 1070nm
Working specification
Re accuraccy 0.1mm/m
Fast speed 0-700mm/s
Acc speed 0-4000mm/s^2
Working speed
0-350 mm/s
Wroking ACC
0-2000mm/s^2
DRIVER YASKAWA
Transmission Ball screw /Dual-drive rack
controlsystem system CYPCUT (PMAC option)
Auxiliary systems
Colling system CW6000/LW16
Lubrication Systems Manual
Laser head American II-VI
Software
Software CYPCUT
Graphic support AI 、BMP 、PLT 、DXF 、DST etc

Model
Specification quantities Origin remark
Fiber laser 500W 1p Paycuss/IPG
cutting Head 1p American II-VI/LASERMECH
Focus 1p American II-VI
Servo motor 3 p YASKAWA
Ball screw/Gear 3p Atlanta / WMH Herion
Laser head 1p
Chiller 1p
Control system 1p CYPCUT/PMAC
Linear 1p Hiwin
Lubrication Systems 1p
SOFTWARE 1P
MACHINE BED 1


IPG or Racuys 500W thickness
　 Carbon steel Stainlesss steel
　 O2 Compress Air N2
thickness speed speed speed
(mm) （mm/s) （m/min） （mm/s) （m/min） （mm/s) (m/min)
0.5 380-400 22.8-24 　 　 400-410 24-24.6
1 180 10.8 155 9.3 155 9.3
1.5 120 7.2 　 　 　 　
2 80 4.8 30 1.8 45-50 2.7-3
2.5 47 2.82 　 　 　 　
3 35 2.1 8 0.48 10 0.6
6 10　 0.6　 　 　 　 　
Carbon steel with 1.0Mpa（10bar）O2，SS with 2.0Mpa（20bar）N2


Above is just for reference ,the real speed will be close relation with material and cutting
Power materials thickness Max staight line speed（m/min)
N2 Compressed Air O2
500W Raycuss SS 1 7-8.4 10-11 11-13
2 3-3.3 3.5-4.2 5-6.6
3 0.8-1 1.2-1.5 2.5-3.3
4 0.72-0.78 2-2.4
5 0.3-0.36 1.2-1.5
6 0.8-1
S 1 9-9.3 10-12
2 2.7-3 6-6.3
3 0.6-0.72 2.5-3.3
4 0.3-0.36 2-2.4
5 1.2-1.5
6 0.8-1

Attachment 287524Attachment 287526

skype: wkquiven
[email protected]
Quiven form gweike laser
www.wklaser.com