[ASMEPicasso]

The Seicos Strikes again...
Came in Monday and Had the previously Mentioned "[1016] (001C) AIP1 Alarm- RAM Error" on one of our Hi-cells. Translated some japanese and proceeded to swap SAMS1 board as it said to no avail... and of course theres no great phone support out there for these machines.. anyone else had any experience? Any wisdom in the matter of repairing it would be greatly appreciated...

[shas595]

Hello

how often do you get it? Have you check the system table for RAM allotment? PM me your email if need be, I have a lot of experience with HiCells / Hitachi Seikis in general

[ASMEPicasso]

Currently it is constant, according to a manual I have from the UK, I swapped out the Sams1 board with a spare however did not help, I'll have to check out the system table in the morning... I've never actually seen this before

[shas595]

The LED's you show are not consistent with that alarm on the screen. The AIP is a section on the SAMS board, but likely it's not a hardware issue

[ASMEPicasso]

Depending on your setup.. card bank in left cabinet at back of machine... believe 3.6v battery. leave machine powered on anytime the battery is disconnected.

[shas595]

ASMEPicasso, what did you do to resolve your issue?

[rodrigomex]

Hello
I am having the same 1016 ram error alarm. Were you able to fix it. I would really need help.
Thanks.
Rodrigo

[shas595]

Hello
I am having the same 1016 ram error alarm. Were you able to fix it. I would really need help.
Thanks.
Rodrigo

1016 is that your SAMS1 card is no good. Do you have a spare machine you can swap with to confirm?

John

[rodrigomex]

1016 is that your SAMS1 card is no good. Do you have a spare machine you can swap with to confirm?

John

I have two other machines with same control, I will take the board frome one of them and see what hapend. I will let you know.
Thanks John.

[NEALATLAS]

Hello

how often do you get it? Have you check the system table for RAM allotment? PM me your email if need be, I have a lot of experience with HiCells / Hitachi Seikis in general

I am having a problem where my hitec turn says pc not ready ram check battery error,any help would be amazing.I know this is a old thread but I am getting real desperate.

[shas595]

I am having a problem where my hitec turn says pc not ready ram check battery error,any help would be amazing.I know this is a old thread but I am getting real desperate.

Hello
Send me a PM and I’ll help you out
John


Sent from my iPhone using Tapatalk