585,575 active members*
3,512 visitors online*
Register for free
Login

Thread: Sourcing small sze stainless strip

Results 1 to 3 of 3
  1. 07-31-2015, 11:08 PM #1
    greybeard
    greybeard is offline Registered
    Join Date
    Jun 2005
    Posts
    1425

    Sourcing small sze stainless strip

    I'm having no luck in finding a source of stainless steel strip 5 mm wide by 0.4 - 1 mm thick, preferably in UK.
    I've had a quote for laser cutting from 0.9mm sheet, but that's far too expensive.
    I'm needing about 30 metres for a prototype, and at this stage any material would do, though the final product will be powder coated.
    Anyone got any ideas ?

    John
    It's like doing jigsaw puzzles in the dark.
    Enjoy today's problems, for tomorrow's may be worse.
  2. 07-31-2015, 11:28 PM #2
    LaserToolShop
    LaserToolShop is offline Registered
    Join Date
    Aug 2007
    Posts
    20

    Re: Sourcing small sze stainless strip

    could you ask spring's manufacturers in UK ?
  3. 08-01-2015, 03:47 AM #3
    greybeard
    greybeard is offline Registered
    Join Date
    Jun 2005
    Posts
    1425

    Re: Sourcing small sze stainless strip

    I'll certainly give that a try, so thanks for the suggestion.
    John
    It's like doing jigsaw puzzles in the dark.
    Enjoy today's problems, for tomorrow's may be worse.
« Previous Thread | Next Thread »

Similar Threads

  1. Small Stainless steel pins
    By captainDL in forum North America RFQ's
    Replies: 1
    Last Post: 10-14-2012, 02:11 PM
  2. Polishing small Stainless parts
    By bwprice100 in forum Mass finishing equipment/media/strategies
    Replies: 5
    Last Post: 01-08-2012, 12:21 PM
  3. RFQ - Small Stainless Steel Lever
    By sunshinedave in forum Employment Opportunity
    Replies: 2
    Last Post: 07-28-2010, 07:50 PM
  4. Can a small one do stainless
    By qet in forum Benchtop Machines
    Replies: 13
    Last Post: 02-17-2009, 09:16 PM
  5. small stainless parts
    By fastolds in forum Employment Opportunity
    Replies: 3
    Last Post: 03-09-2007, 04:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules