Originally Posted by
dontpanic
I would use the macros just as you do.
We used to programm a knee mill long years ago in the shop floor exactly as you are explaining.
we created family of common operations with fixed macros, then we "assembled" some new parts
very easily without any need for cam or thinking trajectories. It was straightforward and very SECURE
because the Subs or macros we used, were all tested.
We need from UCcnc the macro support as I mentioned in another triad. To be able to call a macro from another macro
with
M98 mickey.tap .....
M98 donald.tap
etc....