584,841 active members*
4,329 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Colchester Tornado lathes > Duplomatic Turret does not lock in on start up- Colchester Tornado 200 Lathe
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2015
    Posts
    1

    Duplomatic Turret does not lock in on start up- Colchester Tornado 200 Lathe

    On Start up of the machine the turret just continues to rotate....no lock in position activated ?

    Any advice please

  2. #2
    Join Date
    Aug 2018
    Posts
    12
    Hi.

    I see that you have a Colchester Tornado 200 and I need your help.

    It happens that one of the memories of the PLC apparently was damaged and I need the information of this so that the machine starts. Can you provide me this information?

    Thank you very much

Similar Threads

  1. Tornado 300 Duplomatic Turret
    By yarpo in forum Colchester Tornado lathes
    Replies: 7
    Last Post: 06-10-2021, 04:24 PM
  2. Duplomatic Turret Issues - Colchester 3000L
    By ricka in forum Colchester Tornado lathes
    Replies: 2
    Last Post: 03-10-2016, 08:01 PM
  3. Duplomatic turret will not lock in
    By jjcastro in forum Colchester Tornado lathes
    Replies: 0
    Last Post: 02-28-2014, 03:06 AM
  4. Tornado 100 Duplomatic turret and parameter problem
    By bezelchuck in forum Colchester Tornado lathes
    Replies: 0
    Last Post: 12-29-2013, 10:23 PM
  5. Tornado 300 w/Duplomatic Turret Unclamp Alarm
    By tp176 in forum Colchester Tornado lathes
    Replies: 4
    Last Post: 01-26-2011, 05:56 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •