584,874 active members*
4,765 visitors online*
Register for free
Login
IndustryArena Forum > Events, Product Announcements Etc > News Announcements > 4 axis stand alone CNC controller for CNC machines and hobbiests
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2012
    Posts
    17

    Smile 4 axis stand alone CNC controller for CNC machines and hobbiests

    Attachment 289626

    Here is Felicia Jia from TOPCNC.

    Our new version product that support G code, spindle control, MPG, USB Stick Programming is now in market.
    You can change the boot picture into your logo on your own.

    I attached the new version manual in this email.

    Feel free to ask questions.

    1. Product Introduction
    TC55H is an upgrading version of TC55. It can control 4 feeding axis, 1 analog spindle. It is equipped with 16
    input port and 8 output port, supporting importing files from USB stick.

    2. Technical Specifications
    Minimum data unit 0.001 mm
    Maximum data size ± 99999.999mm
    Maximum Speed: 9000mm/min (pulse is 0.001mm)
    Maximum pulse output frequency 150KHz
    Axis 1-4 (X,Y, Z,C)
    X,Y,Z,C axis can conduct linear interpolation, X,Y can do circular interpolation.
    Electric Gear: numerator :1-99999 denominator: 1-99999
    USB: Importing program and boot picture
    Isolated I/O port
    Maximum Program Line: 5000
    Maximum Program: 100
    RAM: 128M
    External Manual Operation: motor clockwise and counter clockwise spinning, start, pause, alert and stop
    G code and M code
    One panel MPG
    3.5 inch color LCD, pixel 320*240
    Analog Spindle Output: one 0-10v analog spindle
    Support both servo and stepper motor
    Support inches, angel, round
    You can change the boot picture on your own

    Ebay Ordering Link:
    http://stores.ebay.com/CNC-Workshop-2012

    Felicia Jia
    Skype: feliciajia19861229
    Whatsapp:+8613811674107
    [email protected]

  2. #2
    Join Date
    Oct 2018
    Posts
    1
    I have the controller TC55H
    What post processor do i need to read on the usb?
    I have not received instructions for use and i cannot find anything on the internet.
    I went to the manufacturing company's site but found nothing, i can not upgrade to firmware, do not have the download page for use, they only have products for sale.

Similar Threads

  1. Ethernet 6-axis Stand-alone Motion Controller
    By adtechcn in forum News Announcements
    Replies: 0
    Last Post: 11-15-2012, 10:55 AM
  2. Stand alone controller
    By Bread_O in forum CNC Machine Related Electronics
    Replies: 5
    Last Post: 01-01-2011, 11:57 AM
  3. SOC-Machines 4-Axis Controller?
    By gt3073b in forum Stepper Motors / Drives
    Replies: 8
    Last Post: 04-22-2008, 12:12 PM
  4. Stand Alone Controller
    By Bread_O in forum CNC Machine Related Electronics
    Replies: 13
    Last Post: 05-08-2007, 12:32 PM
  5. Stand-alone CNC controller
    By tim168 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 6
    Last Post: 01-24-2006, 06:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •