585,877 active members*
3,154 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Vectric > Change the depth of a cut over distance???

Thread: Change the depth of a cut over distance???

Results 1 to 3 of 3
  1. 07-27-2015, 08:23 PM #1
    crob09
    crob09 is offline Registered
    Join Date
    Dec 2010
    Posts
    313

    Question Change the depth of a cut over distance???

    Hello,

    I'd like to gradually change the cut depth of a single line, say for example I start at 0 then over the span of 200mm step into the work 4mm. Just make a Gradient of 4mm over 200mm if possible.

    Can I do this using Vector? If so How?

    Thanks in advance for your help,

    Rob
    Website http://whatisacnc.com
    Reply With Quote Reply With Quote
  2. 07-27-2015, 08:28 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538

    Re: Change the depth of a cut over distance???

    Try the Fluting Tool.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 07-27-2015, 08:32 PM #3
    crob09
    crob09 is offline Registered
    Join Date
    Dec 2010
    Posts
    313

    Re: Change the depth of a cut over distance???

    Thank you! I'll give it a shot.
    Website http://whatisacnc.com
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. retract distance and go to zero.
    By FoxCNC1 in forum Aspire
    Replies: 9
    Last Post: 02-14-2014, 07:05 PM
  2. Does Microstepping value change distance traveled?
    By Fastest1 in forum Stepper Motors / Drives
    Replies: 2
    Last Post: 03-09-2012, 04:40 PM
  3. Interface to the iGaging “Snap Depth” Mini Depth Gauge Digital indicator
    By bo.gardmark in forum PCB milling
    Replies: 2
    Last Post: 02-04-2012, 05:27 PM
  4. Distance is off..Set a Ratio?
    By Ezra in forum Joes CNC Model 2006
    Replies: 2
    Last Post: 11-14-2010, 06:43 PM
  5. Bearing distance
    By pyrojon in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 05-23-2005, 01:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules