hi guys, i have calibrated the mirror so that is on the same spot when it fires on the left and right, because in my machine the second mirror cannot move through an Y axis, but after doing that, the laser beam now cuts it too thick, and the cut on 1 cm plexiglass is sided on one way
Results 1 to 1 of 1
-
08-22-2015, 10:14 AM #1
Registered
- Join Date
- Aug 2015
- Posts
- 4
co2 laser machine cuts to thick and sides on one way
Reply With QuoteSimilar Threads
-
Surface contour cuts both sides
By bl3030 in forum MastercamReplies: 3Last Post: 04-23-2014, 08:25 AM -
Laser cut not square but divergent on all sides of cut piece
By Ciencias in forum Laser Engraving / Cutting Machine General TopicsReplies: 8Last Post: 08-21-2013, 02:03 AM -
3/8" thick aluminum, 2D cuts, 2 different pieces, 20 sets required
By theorie in forum North America RFQ'sReplies: 13Last Post: 03-10-2013, 02:12 PM -
Laser cut parts 3/16 thick
By cloud chaser in forum Employment OpportunityReplies: 0Last Post: 10-27-2010, 01:15 AM -
The laser carving cuts the machine
By hkxy in forum News AnnouncementsReplies: 12Last Post: 08-31-2005, 09:17 PM
Tags for this Thread
Posting Permissions
