Hi,
I have a contorller that do not have any inputs for the Hall sensors.
In the same time the motor has the normal outputs A B C and 3 for the halls.
As expected the drive "complains" that can't read the encoder
I believe that the Hall signals are overlaped with the ABC impulses.
Anybody knows about any converter or solution to make this work?
Thank you,
Dan
Thread: Hall encoders
Results 1 to 3 of 3
-
11-27-2006, 11:15 PM #1
Registered
- Join Date
- Jan 2006
- Posts
- 8
Hall encoders
-
11-28-2006, 01:26 AM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
If I read you right, you have a drive that does not have hall inputs and you are trying to mate it to a motor that does?
What is the drive type you have? As obviously it does not sound like a BLDC drive.
Usually the 'Hall' tracks are completely separate.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
11-28-2006, 04:24 PM #3
Registered
- Join Date
- Jan 2006
- Posts
- 8
Hi,
Looks like Yashawa has this kind of drives and encoders. (motors with no halls). Motors are cheaper and hall are sensitive to vibration.
Dan
Reply With Quote
Posting Permissions
