[jrecto99]

I am looking for software JUST to transfer programs back and forth between a CNC and a PC. I have tried both NCLite from Cadem and NCLink from OneCNC.

Neither of those work for various reasons. NCLink can not run on windows 7 and NCLite can not use the USB port on he PC.


Does anybody know of any other options I can try?


This is the criteria that the solution must meet.
It must run on Windows 7 64bit.
It must work with USB. Our computer does NOT have a serial port (RS232) so it needs to work with the USB utilizing a USB-RS232 adapter.
It must be FREE or extremly inexpensive. It will be installed on 70 PC's so it must be cost affective.

Any suggestions?
Thanks,
Jasper

[nexasamerica]

Hey Jasper,

This thread is fairly old so I'm hoping you found a solution to your issues. If not I think you would like to take a look at our website: Welcome to Nexas America - Improve your manufacturing productivity we have an inexpensive software system we call FlashDNC that does exactly what you're asking. It was made to work with USBs and there is no extra charge for how many computers you put it on.

Hope this proves to be helpful!

Your Nexas Team