584,800 active members*
4,518 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > Electrocraft BRU-200 Drive questions
Page 3 of 3 123
Results 41 to 53 of 53
  1. #41
    Join Date
    Sep 2010
    Posts
    1765

    Re: Electrocraft BRU-200 Drive questions

    Quote Originally Posted by mike_Kilroy View Post
    Search this forum: I have posted link to my online cc of manual more than once....
    here is link yet again:

    https://app.box.com/s/t84rxtbkz82vtlhmv4xk

    147 pages. enjoy.

  2. #42
    Join Date
    May 2010
    Posts
    12

    Re: Electrocraft BRU-200 Drive questions

    email sent too please send me

  3. #43
    Join Date
    Sep 2010
    Posts
    1765

    Re: Electrocraft BRU-200 Drive questions

    Quote Originally Posted by OBHUR View Post
    email sent too please send me
    here is link yet again:

    https://app.box.com/s/t84rxtbkz82vtlhmv4xk

    147 pages. enjoy.

  4. #44
    Join Date
    May 2010
    Posts
    12

    Re: Electrocraft BRU-200 Drive questions

    Thank you mike that was fast . appreciated

  5. #45
    Join Date
    Jul 2016
    Posts
    1
    Hi Jan-Willem may i know how do u reprogram the watchdog timer. Because i have the same same fault as u mention. Thank u.

  6. #46
    Join Date
    Jun 2016
    Posts
    30
    Hi, I need U12 RAM content .PM030BS4075RH-0 9105-0009-002 Could anyone read and send me bin please?
    I have bad checksum.

    Thanks
    Regards

  7. #47
    Join Date
    Jun 2016
    Posts
    30
    Hi, this is the link with the bad file,ayone knows where is checksum?

    https://1drv.ms/u/s!Ag5s11mpTf5CgZxn37o7egd2NHpWWA

    Thanks
    Regard

  8. #48
    Join Date
    Apr 2006
    Posts
    40

    Re: Electrocraft BRU-200 Drive questions

    I have U12 8kbytes DS1225 RAM PM020BS3016NH-0X with bad chechsum , I would look for a kind person who could post / post me the .bin copy of this or even another similar version

  9. #49
    Join Date
    Apr 2006
    Posts
    40

    Re: Electrocraft BRU-200 Drive questions

    I understood these things about the code on the backed ram:

    PM020BS3016NH-0X
    PM = PERSONALITY MODULE
    020 = 20AMPERE
    BS = ??
    3016 = MOTOR FRAME H3016 Electro-Craft
    N = MOTOR WINDING KE V/krpm DESIGNATOR
    H = OPTICAL ENCODER 2000 LINE COUNT(STANDARD)
    -0X = ??

    The letters BS and 0X what could they mean?

  10. #50
    Join Date
    Jul 2019
    Posts
    1

    BRU-200, DM-30 problems

    Hello, I am having trouble with the BRU-200 Brushless Servo Drive, for some reason I keep getting "SSO false" (System Status Output). I've read in the manual that this is caused by some kind of DM fault or by the reset switch, however, the reset switch is never activated. I'm not sure whats causing the DM fault, or why this SSO false error is popping up.
    Can anyone help me out on this?
    Last edited by Dan_25; 07-31-2019 at 09:36 PM.

  11. #51
    Join Date
    Mar 2015
    Posts
    13

    Re: Electrocraft BRU-200 Drive questions

    Hi everyone, here's what I know about this drive:

    P1-1 and P1-2 have to be shorted for the drive to be enabled.
    P1-3 (-) and P1-4 (+) controls the speed of the motor. You have to give it a 0-10V signal to control it. Note that there are PWM to 0-10V converter out there (about 5$) that could be use to use a simple microcontroller to control it.
    P2-1 and P2-2 have to be shorted to turn in clockwise direction
    P2-3 and P2-4 have to be shorted to turn in counter-clockwise direction
    P5-4 is used to control the current limit with a 0-10V signal

    To control/test/troubleshoot the drive, you have to set up the jumpers P11 (2-3), P12 (2-3) and P13 (1-2) to RS-232 mode. Use Hyperterminal, COM1 (your serial port from your computer), full duplex, 9600 baud, parity none, data bit 8, stop bit 1, Xon Xoff,
    You have to put P10 jumper to position 2-3 to be able to save your tuning to personality module (Never move that jumper when the drive is powered)

  12. #52
    Join Date
    Mar 2015
    Posts
    13

    Re: Electrocraft BRU-200 Drive questions

    It seems that whatever what I do, I "can't save to personality module". Does anyone also have this problem or have a solution for it?

    I also only managed to make the motor turn in one direction, whatever the states of the FAC or RAC inputs.

  13. #53
    Join Date
    Nov 2020
    Posts
    1

    Re: Electrocraft BRU-200 Drive questions

    Quote Originally Posted by Jan-Willem View Post
    I've solved the problem. I've found the manual.
    If led 2 and 4 are on this means that the timekeeper is defect.
    I've programmed a new timekeeper and it's working again.

    I didn't try to make connection to the drive with a communication cable and software because the machine had to much work. However it should be possible.


    Hola, gracias por la informacion, me podrias explicar como hiciste para programarlo? o solo cambiaste la parte? recordas cual es el watchgog en la placa?, gracias.

Page 3 of 3 123

Similar Threads

  1. Electrocraft BRU 105 Servo drive Schematic
    By lekridge in forum Want To Buy...Need help!
    Replies: 10
    Last Post: 10-25-2019, 03:28 PM
  2. Electrocraft max430 brush servo drive
    By italian-grinder in forum Servo Motors / Drives
    Replies: 0
    Last Post: 12-11-2010, 05:05 PM
  3. Electrocraft DDM Drive Problem
    By Trevor Archer in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 09-15-2009, 03:47 AM
  4. Questions about belt drive
    By lonnieh in forum Waterjet General Topics
    Replies: 2
    Last Post: 05-08-2008, 07:20 PM
  5. Questions on drive setup
    By elogicca in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 05-15-2007, 06:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •