[terkaa]

Hi,

We have MX45VBE with OSP700M contol. Last monday we got following error:

ALARM-P 951 SMP ILLEGAL 6880100

Alarm list explains: CPU error has occured on the main board other than 1st main board. And first number 6 should tell which board. But does someone know which board is no 6?

Sometimes we also get BUS ERROR during start up with ACCESS ADRESS F4016014 Can someone pin point faulty board with these informations?


Tero

[terkaa]

Ok,

ACCESS ADDRESS F4016014 indicates fault in Mainboard NO.6 and Mainboard no 6. Is EC CONTROL Board. BUT theres is no EC Control board on this controller. Now I am stuck again...

Tero

[terkaa]

OK,

Here we have a table with ACCESS ADDRESS FOR OSP 7000

ADDR Board DIP Setting

$40000000 CCP Board (1st) *000
$42000000 CCP Board (2nd) *001
$44000000 CCP Board (3rd) *010
$46000000 CCP Board (4th) *011
$48000000 CCP Board (5th) *100
$4A000000 CCP Board (6th) *101
$4C000000 CCP Board (7th) *110
$4E000000 CCP Board (8th) *111
$50000000 TCPIP Board
$54000000 NOT USED
$DC000000 Memory Board (1st) 0*** Flash Area
$DC400000 Memory Board (2nd) 1*** Flash Area
$DC800000 NOT USED
$DE000000 Memory Board (1st) 0*** SRAM Area
$DE880000 NOT USED
$DF000000 Memory Board (2nd) 1*** SRAM Area
$DF880000 NOT USED
$DFF00000 Memory Board (1st) 0*** I/O Area
$DFF10000 Memory Board (2nd) 1*** I/O Area
$DFF20000 NOT USED
$E0000000 Main Board (1st) 1000
$E4000000 Main Board (2nd) 0001
$E8000000 Main Board (3rd) 0010
$EC000000 Main Board (4th) 0011
$F0000000 Main Board (5th) 0100
$F4000000 Main Board (6th) 0101
$F8000000 Main Board (7th) 0110


First is ADDRESS then board name then its dip swith setting. In our case Main Board(6th) is Main Board 2

[terkaa]

Second page

$FC000000 SVP Board (1st) *000 The 1st axis
$FC040000 SVP Board (1st) The 2nd axis
$FC080000 SVP Board (1st) The 3rd axis
$FC0C0000 NOT USED
$FC100000 SVP Board (2nd) *001 The 4th axis
$FC140000 SVP Board (2nd) The 5th axis
$FC180000 SVP Board (2nd) The 6th axis
$FC1C0000 NOT USED
$FC200000 SVP Board (3rd) *010 The 7th axis
$FC240000 SVP Board (3rd) The 8th axis
$FC280000 SVP Board (3rd) The 9th axis
$FC2C0000 NOT USED
$FC300000 SVP Board (4th) *011 The 10th axis
$FC340000 SVP Board (4th) The 11th axis
$FC380000 SVP Board (4th) The 12th axis
$FC3C0000 NOT USED
$FC400000 SVP Board (5th) *100 The 13th axis
$FC440000 SVP Board (5th) The 14th axis
$FC480000 SVP Board (5th) The 15th axis
$FC4C0000 NOT USED
$FC500000 SVP Board (6th) *101 The 16th axis
$FC540000 SVP Board (6th) The 17th axis
$FC580000 SVP Board (6th) The 18th axis
$FC5C0000 NOT USED
$FC600000 SVP Board (7th) *110 The 21st axis
$FC640000 SVP Board (7th) The 20th axis
$FC680000 SVP Board (7th) The 21th axis
$FC6C0000 NOT USED
$FC700000 SVP Board (8th) *111 The 22th axis
$FC740000 SVP Board (8th) The 23th axis
$FC780000 SVP Board (8th) The 24th axis

[terkaa]

And last page:

$FC800000 NOT USED
$FCC00000 TFP Board (1st) 0***
$FCD00000 TFP Board (2nd) 1***
$FCE00000 NOT USED
$FD000000 NOT USED
$FED00000 CRP Board (3rd) **10 NOT USED
$FEE00000 CRP Board (2nd) **01 NOT USED
$FEF00000 CRP Board (1st) **00
$FF000000 NOT USED
$FF1C0000 RPP Board RS232C I/F CH2
$FF1D0000 RPP Board RS232C I/F CH1
$FF1E0000 RPP Board RS232C I/F CH2
$FF1F0000 FRP Board RS232C I/F CH1
$FF200000 FRP Board Floppy I/F
$FF210000 FRP Board PTR
$FF220000 RPP Board Puncher I/F
$FF230000 RPP Board Printer I/F
$FF240000 NOT USED