[CCAJohn]

Hi
Can anyone help me with a Post processor file (.pst, not PostHaste) for a Femco Durga 25 with fanuc 0TC. A generic 0T would be great, however if I could find a processor custom to the 24 station turret That would be wonderful. The ID turret needs to be on T0100 to index the OD turret and the OD turret needs to be on T2100 to index the ID Turret. If anyone can help, I would greatly appreciate it.
Thanks
CCAJohn

[Cam_Wizzard]

Did you find what you were looking for? I would like to have a copy if you did get one as well as any if not all of the posts' you have for Gibbs. I am collecting a library and checking it for duplcates to make a community Master list...

[ggate]

might try this site



http://www.austinnc.com/mill.html

[Uguessedit]

Did you find what you were looking for? I would like to have a copy if you did get one as well as any if not all of the posts' you have for Gibbs. I am collecting a library and checking it for duplcates to make a community Master list...

Did you ever get that liobrary going. I have some new posts for gibbs coming but would also like to contibute and use posts from a shared compilation. It is a great idea for community and for those of us with small shops where every dollar matters. I have a 3 axis Centroid post that has worked for all centroid machines we have new and old and a Fadal 3016/4020 4 axis post arriving in email any day.
we still need robodrill fanauc 16i-m posts for 4/5 axis.

[IMAMAN]

Would you have a post file for a Dawoo Puma 240-MA?

I have a collection of post files from different companies that I can send you to add to your collection. Contact me at. [email protected]

[irwintools]

Hi, I am trying to build a DIY CNC mill using (Cortex stepper 2 axis control from RS Components) and would like to run this in GibbsCam - is this possible? I am new to this sort of thing so any help would be great. I think I need a Post Processor?

[greenramp]

Looking for one as well to post to a HAAS VM3 from gibbscam any luck?

[MrCntry]

Here is a post processor for a fadal. If you need any other post processors for GibbsCam just let me know. I have been using the software since Virtual Gibbs. Many years now.

[backghost87]

Here is a post processor for a fadal. If you need any other post processors for GibbsCam just let me know. I have been using the software since Virtual Gibbs. Many years now.

Hi man . If you have postprocessor for Mitsubishi FX 10, Thanks

[txcncman]

If you look through my old posts, at one time, I posted about 1900 variations on GibbsCam posts. I do not know if one you can use is there, but you are welcome to look.

[backghost87]

If you look through my old posts, at one time, I posted about 1900 variations on GibbsCam posts. I do not know if one you can use is there, but you are welcome to look.

ok i will search for it . thanx

[metalpoisoning]

Do you have a post for a Haas ST10Y turning center?
Thanks!

[NikMalov]

Here is a post processor for a fadal. If you need any other post processors for GibbsCam just let me know. I have been using the software since Virtual Gibbs. Many years now.

Hi. Do you have any 5-axis post fo GibbsCAM? I'd be very gratefull.

[progrite]

Need a post for a Hurco TM6i

[petextr]

I looking for heidenhain 5 axis post do you have any

[jonnylaw8069]

Looking for a post for oi tf lathe

[MetalZilla]

try WebMachinist.Net The Online Source for Machining Resources

[miran70]

i have abunch for dostek we use it with gibbscam here they are if you need dostek to just try i can help you pm me if you need that i love it

[miran70]

I'm sorry those files i posted are all Gibbscam .PST files except i think one so you guys need to download them and see if any will help you i cant say for sure but they could possibly help.
mike

[bawbag]

You are a life saver thank you. :-)