584,841 active members*
4,487 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > GibbsCAM > GibbsCam Post Processor Needed
Page 1 of 2 12
Results 1 to 20 of 38
  1. #1
    Join Date
    Nov 2006
    Posts
    4

    Exclamation GibbsCam Post Processor Needed

    Hi
    Can anyone help me with a Post processor file (.pst, not PostHaste) for a Femco Durga 25 with fanuc 0TC. A generic 0T would be great, however if I could find a processor custom to the 24 station turret That would be wonderful. The ID turret needs to be on T0100 to index the OD turret and the OD turret needs to be on T2100 to index the ID Turret. If anyone can help, I would greatly appreciate it.
    Thanks
    CCAJohn

  2. #2
    Join Date
    Feb 2007
    Posts
    2

    Gibbs Post

    Did you find what you were looking for? I would like to have a copy if you did get one as well as any if not all of the posts' you have for Gibbs. I am collecting a library and checking it for duplcates to make a community Master list...

  3. #3
    Join Date
    Feb 2007
    Posts
    3

    processor

    might try this site



    http://www.austinnc.com/mill.html

  4. #4
    Join Date
    May 2008
    Posts
    1

    DIY Mill (2 Axis)

    Hi, I am trying to build a DIY CNC mill using (Cortex stepper 2 axis control from RS Components) and would like to run this in GibbsCam - is this possible? I am new to this sort of thing so any help would be great. I think I need a Post Processor?

  5. #5
    Join Date
    Sep 2008
    Posts
    1
    Looking for one as well to post to a HAAS VM3 from gibbscam any luck?

  6. #6
    Join Date
    Dec 2009
    Posts
    6

    Exclamation

    Here is a post processor for a fadal. If you need any other post processors for GibbsCam just let me know. I have been using the software since Virtual Gibbs. Many years now.
    Attached Files Attached Files

  7. #7
    Join Date
    Nov 2011
    Posts
    0
    Quote Originally Posted by MrCntry View Post
    Here is a post processor for a fadal. If you need any other post processors for GibbsCam just let me know. I have been using the software since Virtual Gibbs. Many years now.
    Hi man . If you have postprocessor for Mitsubishi FX 10, Thanks

  8. #8
    Join Date
    May 2004
    Posts
    4519
    If you look through my old posts, at one time, I posted about 1900 variations on GibbsCam posts. I do not know if one you can use is there, but you are welcome to look.

  9. #9
    Join Date
    Nov 2011
    Posts
    0
    Quote Originally Posted by txcncman View Post
    If you look through my old posts, at one time, I posted about 1900 variations on GibbsCam posts. I do not know if one you can use is there, but you are welcome to look.
    ok i will search for it . thanx

  10. #10
    Join Date
    Jan 2007
    Posts
    243

  11. #11
    Join Date
    Sep 2006
    Posts
    29

    files

    i have abunch for dostek we use it with gibbscam here they are if you need dostek to just try i can help you pm me if you need that i love it
    Attached Files Attached Files

  12. #12
    Join Date
    Sep 2012
    Posts
    0
    Hey,
    We bought:

    Multiplex 6100 - Mazatrol 640T

    Need Gibbscam Post Processor.

    [email protected]

    thx.

  13. #13
    Join Date
    Mar 2013
    Posts
    0
    Quote Originally Posted by MrCntry View Post
    Here is a post processor for a fadal. If you need any other post processors for GibbsCam just let me know. I have been using the software since Virtual Gibbs. Many years now.
    Hi. Do you have any 5-axis post fo GibbsCAM? I'd be very gratefull.

  14. #14
    Do you have a post for a Haas ST10Y turning center?
    Thanks!
    ----- <a href="http://www.cambridgemachine.com"> CNC Machine Shop Portland, OR</a>

  15. #15
    Looking for a Gibbs Post for a Haas ST 10Y Thank you!
    ----- <a href="http://www.cambridgemachine.com"> CNC Machine Shop Portland, OR</a>

  16. #16
    Join Date
    Apr 2013
    Posts
    0
    Good day. I have 3 axis machining center ZPS MCFV 1680 MC control system Acramatic A2100 and I need it for GibbsCAM post processor. Can you please help?
    Thank you for your answer, best regards

    Hruška Martin

    [email protected]

  17. #17
    Join Date
    Jan 2007
    Posts
    243
    You may want to try: GibbsCam Post
    www.WebMachinist.Net
    The Ultimate Online Source for Machinist Related Stuff!

  18. #18
    Join Date
    Jan 2008
    Posts
    9
    I need Help,
    I need a post processor for GibbsCam for a Nardini lathe with Fanuc 20T control.
    Thanks.

  19. #19
    Join Date
    May 2015
    Posts
    1

    Re: GibbsCam Post Processor Needed

    does anyone have gibbs postprocessors for lathes - haas, doosan and okuma?

  20. #20
    Join Date
    Sep 2006
    Posts
    29

    Re: files

    I'm sorry those files i posted are all Gibbscam .PST files except i think one so you guys need to download them and see if any will help you i cant say for sure but they could possibly help.
    mike

Page 1 of 2 12

Similar Threads

  1. Post processor for GibbsCam
    By Steve Seebold in forum Tormach Personal CNC Mill
    Replies: 5
    Last Post: 07-12-2021, 10:27 PM
  2. Gibbscam Post processor needed for a haas
    By LEE-APEX in forum Post Processors for MC
    Replies: 1
    Last Post: 11-22-2013, 07:09 AM
  3. GibbsCam Post Processor Needed Help!
    By MetalZilla in forum Haas Mills
    Replies: 5
    Last Post: 06-03-2007, 04:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •