[tizank]

I would like to get a quote on a tube made of low carbon steel that has a inside diameter of three hundred and ninety two thousandths with five thousandths available on the positive side for the tolerance and the tube size from side to side measures four inches and a half and fifty thousandths plus and minus ten thousandths and on one side of the tube a turned diameter of eighthundread and twenty thousandths and one hundred thousandths wide and the last diameter of one inch and ninety two thousandths minus five plus zero and two hundred thousandths wide to be the second diameter from the same side of the tube to look like the shape of the letter t all other tolerances are plus and minus five thousandths

[InMesh]

I have worked in a tube mill and the forming rollers you are looking at may be cost prohibitive ,but you never know.

[tizank]

I would prefer a quote from a person that has a small home lathe to machine the parts if possible

[tizank]

I dont need the tubes anymore thanks.