I need a post for Mori Seiki MV Junior milling machine, Fanuc 10M,(im running Mastercam 8.1), that seperates the tool select command from the tool change command putting it onto a seperate line.
i.e.
The standard post produces
N100 T1M6
I need the post to produce
N100 T1
N110 M6
and will also move the Y axis to at least the 100mm from the reference point as required by the Mori for the tool change position, but still return to the XY reference point at the end of a job.
Results 1 to 3 of 3
-
11-30-2006, 06:12 PM #1
Registered
- Join Date
- Nov 2006
- Posts
- 2
Help needed with Mori Seiki MV Junior post
-
12-06-2006, 10:12 AM #2
Registered
- Join Date
- Nov 2006
- Posts
- 367
Baxter I sent you an email
www.cad2cam.net
Programmer/ Certified Cam Instructor
-
12-12-2006, 10:59 AM #3
Registered
- Join Date
- Nov 2006
- Posts
- 2
Thanks for your reply Steve,
I'm sorry for the delay.I am a very infrequent netter and I have been tolerating my present post processor for several years, so no rush. I will now be making sure that I have described all of the existing posts faults and then I will probably be in touch.
Kind regards and happy Christmas. Baxter.
Reply With Quote
Posting Permissions
