584,830 active members*
5,608 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > tool offset measure button don't work
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2005
    Posts
    267

    tool offset measure button don't work

    Anybody know how to get the tool offset measure button to work? this is on a hardinge chnc 2+ with a General Numeric GN10 control and is the soft key on the control, geometry, work shift. any help would be great. thanks

  2. #2
    Join Date
    Aug 2019
    Posts
    145

    Re: tool offset measure button don't work

    If you are sure of operation and that it is not functioning then is suspect an option.
    If memory serves that function is possibly Work Zero Measure. I don't know of any other parameters that would affect the measure button but its been a while since working on a 10.

  3. #3
    Join Date
    Sep 2005
    Posts
    267

    Re: tool offset measure button don't work

    Yeah maybe, its a pain compared to other controls.Thanks for the reply

Similar Threads

  1. Replies: 0
    Last Post: 09-20-2018, 03:18 AM
  2. Fanuc 18T work offset measure help
    By alabranche in forum Fanuc
    Replies: 4
    Last Post: 02-14-2017, 07:20 PM
  3. Doosan Puma 400 & 18i-T - don't reset work offset
    By myhäje in forum Daewoo/Doosan
    Replies: 4
    Last Post: 10-23-2015, 03:33 PM
  4. Hit Tool Offset Measure by accident
    By BBQ70 in forum Haas Mills
    Replies: 43
    Last Post: 12-02-2010, 03:41 AM
  5. Replies: 1
    Last Post: 04-10-2010, 08:24 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •